Description

Arc Inc. Waterproofing Kits

Arc Inc. Waterproofing Kits

Specially formulated for ARC, Tank/10 Liquid Waterproofing Compound tenaciously bonds to various surfaces to form an utterly protective shield against moisture penetration. The extra protection provided by our joint reinforcement tape and impenetrable, pre-formed corners vastly increases the level of security you achieve with an ARC shower system. When you’re done installing a TrueDEK foundation and thoroughly covering the area with an ARC waterproofing kit, you’ll have a seamless, multi-layer line of defense safeguarding your home and your health.

In addition to its outstanding waterproofing performance characteristics, Tank/10 also provides an anti-fracture membrane to help prevent and limit the effects of slight movement differences between the tile and the substrate below. The impact on your shower is a reduction in the transfer of movement that can form a crack in grout or tile.

Choose from the following kits

Premium Waterproofing Kit

• A ready-to-use kit containing the necessary waterproofing and installation supplies for an ARC shower base and walls in the wet area of a shower
• This kit is for waterproofing an ARC shower base, the surrounding floor to a distance of 2 ft. beyond the base, and the shower walls from floor to ceiling

What’s Included?

• 2 gallons of Tank/10 waterproofing compound (covers approximately 120 sq. ft. with 2 coats)
• 75 ft. of joint reinforcement tape (3 – 25 ft. rolls)
• 4 internal corners
• 2 external corners
• 1 mixer valve gasket
• 1 supply gasket
• 32 – #9 x 2″ weatherproof screws
• 1 Torx power bit driver
• 6 – 10 oz. tubes of Tank/10 polyurethane construction adhesive
• 1 – 10 oz. tube of painter’s acrylic caulk
• 1 paint roller handle
• 2 paint roller covers
• 1 paint brush
• 2 pairs of nitrile gloves (size large)

Pro Waterproofing Kit

• A ready-to-use kit containing the necessary waterproofing and installation supplies for an ARC shower base
• This kit is for waterproofing an ARC shower base, the surrounding floor to a distance of 2 ft. beyond the base, and up the walls 6″ to 12″

What’s Included?

• 1/2 gallon of TANK/10 waterproofing compound (covers approximately 30 sq. ft. with two coats)
• 25 ft. of joint reinforcement tape
• 2 internal corner tape reinforcements
• 2 external corner tape reinforcements
• 32 — #9 x 2½” weatherproof screws
• 1 Torx power bit driver
• 6 – 10 oz. tubes of Tank/10 polyurethane construction adhesive
• 1 – 10 oz. tube of painter’s acrylic caulk
• 1 paint roller handle
• 2 paint roller covers
• 1 paint brush
• 2 pairs of nitrile gloves (size large)