Fast curing, hybrid elastomeric adhesive and sealant from Laticrete International meets all requirements in today’s green building standards while still holding that strong adhesion for a wide variety of substrates like all HYDRO BAN products and accessories
Features
Excellent adhesion on nearly all substrates, including polystyrene
Fast curing
Excellent durability
Superior flexibility
Will not shrink or crack
No harmful components are used
VOC compliant
Allow for flood testing in 2 hours at 70 degrees or higher and 50% RH
Uses
Holds backer-board to HYDRO BAN pre-slopped shower pans
Fasten niches to wall studs and backboard
Adhesive sets in place all cover seams, coves, corners, screws, and tab washer penetrations with full coverage
Coverage
Coverage will vary depending on joint size and width
Approximately 25 linear feet (7.62 m) per tube at 1/4″ x 1/4″ (6 x 6 mm) joint width
Approximately 49 linear feet (14.9 m) per sausage pack at 1/4″ x 1/4″ (6 x 6 mm) joint width
Laticrete Hydro Ban Adhesive and Sealant
Application Temperature Range
35°F – 80°F (2°C – 27°C)
Open Time
20-30 minutes
Set Time
2 hours
Full Cure
40 hours
Clean Up
Soapy water
Mildew Resistance
Good
Dimensions
36 in x 29 in x 20 in
Common Questions
What is Laticrete Hydro Ban Adhesive & Sealant
HYDRO BAN Adhesive & Sealant is a one-component, fast-curing hybrid elastomeric adhesive and sealant. It is specifically formulated to meet today’s Green Building Standards and has excellent adhesion on a wide variety of substrates.
