Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B
Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B, S-310AB-NC-08, 2 x 1/2 liter
Two components are high-strength epoxy adhesives formulated for spot bonding fixing methods for tile and stone installations on vertical surfaces. The adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).
Features
Best speed and productivity over mechanical anchoring, plaster, and wire, and the thin-set method of veneer installation
Easier to work with when compared to traditional methods; no drilling, cutting of kerfs, or setting of pins
LATAPOXY 310 Stone Adhesive allows for quick, easy plumb adjustment while the stone is in place to compensate for uneven walls and stone thickness variations
Permanent; it will not fail or deteriorate over time and is ICC and IBC-approved
1 liter – 2 parts – 2 x 1/2 liter
Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8″ Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m2) out 1/4″ (6 mm) with 1/4″ Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m2) out 1/2″ (12 mm) with 1/2″ Latapoxy Thickness (12 mm)
Uses
Spot bonding marble, granite, and large format ceramic tile on walls and overheads, interior and exterior applications
Adhesive for bonding masonry, precast concrete, and stone panels
Ideal for fireplace surrounds, elevators, and stair risers
Adhesive for bedding and fastening marble, granite, and other stone slabs on walls and wainscoting
Adhesive for fabricating granite, marble, and other stone
Approved by TCNA for Interior applications method W215 and W260
Advantages
Fast Permanent Bond-45 minutes to 1 hour set time
Easy to Use-1:1 mixing ratio by volume
Non-Staining-ideal for white and light-colored? marbles, other stones, and tiles
Withstands shock and vibration
Durable Permanent Bond-will not deteriorate over time
Safe-no solvents
Non-Sag-when applied up to 1″ (25 mm) thick
Approved by the following building code bodies for exterior installations: ICC and IBC
Interior Substrates
Concrete
Concrete masonry units (CMU)
Brick/masonry
Exterior glue plywood
Consult cement backer board manufacturer for specific installation recommendations
Steel surface must be cleaned to remove oil, dust oxidation, and other bond-inhibiting materials
Exterior Substrates
Please consult LATICRETE Technical Services at 800.243.4788, ext. 235, for approval prior to use for all exterior applications
There is a maximum height restriction of 30 ft (9.1 m)
For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242
Concrete Application
Must be a minimum 6″ (150 mm) thick reinforced
Must be a minimum 3500 psi (24 MPa)
Must be a minimum of 28 days old prior to installation
