Internal corner junction in coupled preformed polyethylene.
Features
The polyethylene insulating membrane is coupled on two sides and is compatible with tile adhesive.
The internal corner is usually used to perfect the laying of the Waterstop Foiltec Roll membrane
It is particularly suitable in shower stalls, preventing humidity from spreading to adjacent rooms
Tested with vapor test proving high resistance, making it an excellent option for wet steam rooms
The membrane’s soft, highly elastic material also makes up for any slight movements between the support and the covering, preventing the spread of hazardous microorganisms
FOILTEC membranes include a complete range of accessories to meet specific site requirements, ensuring state-of-the-art installations, contributing to a workmanlike laying
FOILTEC Product Installation
STEP 1: Make sure the base is level, smooth, clean, and dry
STEP 2: Use flexible adhesive, butyl tape, MS polymer adhesive, or waterproof glue to seal any overlaps between FOILTEC, its attachments, and any vulnerable regions.
STEP 3: Before installation, trim the membrane to the proper length. Use a 10 cm overlap along floor-to-wall junctions and a 5 cm overlap in other membrane areas.
STEP 4: Apply the waterproof membrane to the flooring using the proper tile adhesive and a trowel with a 3mm x 3mm notched edge.
STEP 5: Using butyl tape, MS polymer adhesive, or waterproof glue, check and confirm that vital portions or corners are waterproofed.
STEP 6: Lay the flooring tiles directly over the FOILTEC membrane using tile adhesive.
