Rubi Cyclone Leveling System 1/32″ (1MM) Flat Bases
Rubi’s new leveling system is designed to avoid lippage during the laying of ceramic tile in both floor and wall tiles.
Features
Available in 100, 300, and 2400 quantities
Recommended for tiles 12″ x 12″ and larger
It is especially recommended to improve finishes when working with large-format tiles
Easy, fast, and intuitive to use, as no prior user experience is necessary
No tools required – spin the screw cap into place and hand tighten
Spacer bases fit below tiles, and then the cap is screwed on
Guaranteed flatness and regularity of the laying surface
Side grooves at the strap’s base facilitate the transfer of the adhesive, improving the coverage of the ceramic tile
Built-in spacers
Each clip thickness is easily identified thanks to the range of different colors available (1/32″ is a grey clip)
Compatible with other threaded leveling system caps
Recommended for tiles thickness from 3 – 18 mm (1/8″ – <3/4″)
Simple impact removal system (by kicking or mallet) – Always in the direction of the grout joint
Cyclone Caps are sold separately
Technical Data
Use on most tiles and stone from 3 – 18 mm (1/8″ – <3/4″) thick
Minimum joint size: 1/32″ (1mm)
100, 300, or 2400 bases per bag
How to use
STEP 1: Place spacer bases under the tile once the thin set has been applied
STEP 2: Apply Cap. The cap will align with the top of the base, allowing for easy threading
STEP 3: Spin the cap onto the base, and once the cap makes contact with the tile, turn the cap until the adjacent tiles are level; no need to over-tighten
STEP 4: Break off caps and bases after the thin-set has cured. It’s essential to break the cyclone caps by kicking them or hitting them with a rubber mallet in the direction of the grout joint
STEP 5: Remove the broken bases from caps by unscrewing them (caps are reusable and will last multiple jobs with proper installation and removal)
Additional information
Option
1/32" Clips – Bag of 100, 1/32" Clips – Bag of 300, 1/32" Clips – Box of 2400
