Description

Stone Tech Heavy Duty Grout Sealer

Stone Tech Heavy Duty Grout Sealer

Features

• Heavy-duty protection against most stains
• Protects grout and makes cleaning easier
• Natural look
• Water-based, low-solids coating
• Interior and exterior

Where to Use

• Grout for natural stone, ceramic, and porcelain tile
• Expected Wear: 3 to 5 years on interior surfaces and 1 to 3 years on exterior surfaces

Directions for Use

• Allow new grout installations to cure for a minimum of 72 hours prior to application
• Make sure the surface is clean, dry, and free of waxes and coatings
• Ensure that the surface temperature of the stone is between 50-80°F before sealing
• Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated
• Liberally apply using a paint pad, low-pressure chemical-resistant sprayer, narrow roller, or natural hairbrush, focusing on the grout joints
• Allow sealer to penetrate the grout, 5-15 minutes completely
• Liberally apply a second coat following steps 2 and 3
• Wipe up all sealer from the surface of the tile. Use a clean, dry, lint-free cotton towel or mop to remove excess sealer
• If the sealer was not completely wiped off and a residue appears, wipe the entire surface with a towel dampened with sealer
• Use a white nylon pad to loosen the residue and follow with a clean, white, absorbent towel to remove
• A complete cure is achieved after 24-48 hours; foot traffic may begin in 4 hours
• Cover with red rosin paper if foot traffic must resume before the recommended periods have passed
• Clean equipment with water

Available Sizes and Coverage

• Pint: 75-125 sq ft
• 24 oz Sprayer: 100-200 sq ft
• Quart: 150-250 sq ft
• Gallon: 600-1,000 sq ft
• 5 Gallon: 3,000-5,000 sq ft