StoneTech Stone, Masonry and Grout Enhancer and Sealer
Features
Easier to use, water-based formula
Enriches color
Standard protection against most stains
Interior use
Where to Use
Natural stones such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone, textured stone, masonry, and grout
Directions
Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris
Ensure the work area is well-ventilated during application and until the surface is dry
Shake well before using
Apply product evenly and liberally using a paint pad, low-pressure chemical-resistant sprayer, roller, or brush. Avoid applying the product on unintended surfaces
Allow product to penetrate the surface for 15–30 minutes; denser material may require maximum time for Enhancer to penetrate
Keep surface wet with sealer, adding more product if needed to prevent dry spots for the entire penetration time
Following penetration time, thoroughly wipe the surface clean and dry with absorbent towels
DO NOT ALLOW EXCESS ENHANCER TO DRY COMPLETELY ON SURFACE
A second coat may be needed for porous, absorbent surfaces or if a darker appearance is required
Apply the second coat 1 hour after the first coat, following directions in steps 1 and 2
A full cure is achieved after 24–72 hours; foot traffic may begin in 6–8 hours. If needed sooner, cover the floor with red rosin paper to protect it until the recommended periods have passed
